TNV/RVM-14 L3Harris Gen3 Unfilmed White Phosphor Night Vision Monocular
The AB Night Vision RVM bridge and arm are not included. Available separately.
***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER–CURRENT LEAD TIME ON THE TNV/PVS-14 SuperGain is 12-14 Weeks ***
$4,499.00 – $4,999.00
***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER–CURRENT LEAD TIME ON THE TNV/PVS-14 SuperGain is 12-14 Weeks ***
The RVM-14 monocular housing is billet machined from 7075 aircraft grade aluminum and designed to handle challenging real-world environments. The housing design accepts standard mil-spec PVS-14 lenses, or lightweight RPO lenses. The monocular features a side mounting area to accept PVS-14 accessories and mounts with a standard ¼-20 thread. Two monos can also be attached to a bridge mount (RVM-14 Bridge) in a binocular configuration with the small dovetail incorporated into the top of the housing, or the dovetail can be used with the RVM-14 Arm for single mono use. Both the Arm and Bridge are articulating to lay back against the helmet when in the stowed position.
The monocular design features a rotary switch that doubles as gain adjustment. The switch initially turns the tube on at full brightness, then dims the MX-11769 image intensifier tube as the knob is rotated further. The unit includes an onboard infrared illuminator activated by a push button switch on the front of the unit. The button is surrounded by a protective fence to prevent accidental activation. Indicators on the edge of the viewing area show if the IR LED is actively on, or if the unit detects a low battery. The weight of the unit with standard mil-spec lenses and a CR123 battery is 300 grams. The approximate battery life at room temperature is 75 hours. The RVM-14 weighs 15% less than a typical single AA PVS-14 with a 50% longer battery life and has a much tougher housing.
The monocular is available in Flat Black and Flat Dark Earth. The components of the monocular are media blasted to give a nonreflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the
anodizing to give a tough, attractive finish.
TNVC & Night Goggles, Inc. Limited Lifetime Warranty
TNVC, Inc. and Night Goggles, Inc. warrants this product for the lifetime of the product and guarantees this product to be free from manufacturing defects in material and workmanship under normal use, and transferable by the owner assuming that the product otherwise still falls within the scope of this warranty. In the event that a defect covered by this warranty occurs TNVC, Inc. or Night Goggles, Inc., at its discretion, will either repair or replace the product. Such action on the part of TNVC, Inc. or Night Goggles, Inc. shall be the full extent of the company’s liability, and the customer’s sole and exclusive remedy. This warranty applies to all TNV and NGI-branded Night Vision Device housing systems, and furthermore warrants that all Image Intensifier Tubes will be free from manufacturing defects in material and workmanship under normal use for a period of 10 years after the original date of purchase. This warranty does not cover:
- Products that were used in other than normal and customary manner.
- Products that were misused.
- Products that were altered, modified, or repaired by the customer or a party other than TNVC, Inc.
- Products that were discontinued by the manufacturer and either parts or replacement units are not available due to reasons beyond the control of TNVC, Inc.
- Damage, defects, or failures resulting from use that would be construed by any reasonable person as normal and expected “wear and tear.”
TNVC, Inc. shall not be responsible for any defects or damage that in the company’s opinion, resulted from the mishandling, abuse, misuse, improper storage, or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer. This includes using rechargeable batteries, storing the product with batteries installed, or battery compartment corrosion due to faulty battery. Warranty claims falling outside of the scope of these written warranty terms may incur repair, labor, and shipping fees charged to the customer.
Customer is hereby notified that operation of the equipment during daylight or under excessive light conditions may permanently damage the image intensifier tube. While all TNV and NGI systems are auto-gated, they are not able to withstand exposure to constant light including, but not limited to, light sources, weapon sights, laser radiation. Auto-gated Image Intensifier Tubes are designed to stand up to nighttime battlefield light conditions, but prolonged exposure to any light source will still cause damage.
No other warranties except for this one apply to this product, including, but not limited to written, oral, statutory, expressed or implied, including any implied warranty or merchantability or fitness for particular purpose, shall apply to this product.
Export of Night Vision Equipment or related accessories (such as manuals) is strictly regulated by the US Department of State in accordance with the guidelines of the International Traffic in Arms Regulations (ITAR). It is a major crime to ship or carry US manufactured night vision devices outside the borders of the United States, punishable by fines and prison sentences. Ignorance of these regulations will not hold up in court. By purchasing night vision equipment from TNVC, you attest that you will not attempt to export or carry this night vision equipment outside the borders of the United States. Also, it illegal to allow a non-US Citizen to look through US Gen3 Night Vision Devices, even on US soil. Again, this is a crime punishable by fines and prison sentences.
SPECS
Manufacturer (Housing): | AB Night Vision |
---|---|
Weight: | 300g with std Mil-spec optics and battery |
Dimensions: | 2.0” X 2.6” X 4.2” |
Finish: | Corrosion Resistant- Matte Black, FDE Cerakote |
Power: | (1) CR123 Battery |
Battery: | Approx. 75 Hours at Room Temp |
Waterproof: | Submersible to 66 ft |
IR Illuminator: | Yes |
IR LED & Low Battery Indicator: | Yes |
Optical: | ___________________________ |
Generation: | U.S. Gen3 L3Harris MIL-SPEC White Phosphor |
Intensifier Tube: | 18mm MX-11769 Variable Gain |
Tube Specs: | Meets or Exceeds U.S. MIL-SPEC Performance |
Magnification: | 1x |
Field of View: | 40º + 2º |
Diopter Adjystment: | -6 TO +2 |
Eye Relief: | 25mm |
Focus: | 10″ to Infinity |
Ocular Lens: | EFL 26mm |
Objective Lens: | F/1.2 |
Gate: | Auto |
Gain: | Adjustable/ Variable |
Warranty: | Lifetime System Warranty & 10 Year Warranty on image intensifiers |
Includes: | TNV/RVM-14, PVS-14 Adapter (J-Arm)- Color-Matched to Goggle, Rubber Eye Cup, Daylight Filter, Sacrificial Window, Demist Shield, Neck Cord, Soft Carry Case, Two (2x) CR123 Batteries, Lens Cleaning Tissue, Military Maintenance Standards, Warranty Registration |
Reviews
There are no reviews yet.