Steiner Laser Neutral Density Filter

*** These items do not qualify for returns or exchanges ***

***Please use care when installing the NDF on your device, as improper installation can result in tears, damage, or breakage of the rubber strap securing the NDF to your emitter. Each unit is visually checked and inspected before shipping, and TNVC is not liable for any damage that occurs due to improper installation of the NDF.***

These Neutral Density Filters are made for Steiner products and are available for different models (select the appropriate version).  They are compatible with Class1 and Class IIIb lasers.

Laser Neutral Density Filters (NDFs) are a useful accessory for many IR laser systems, as they help attenuate the IR aiming laser’s output, cutting down on excessive bloom and halo around the aiming point that may obscure or otherwise interfere with the user’s ability to observe closer range or smaller targets, and providing a finer dot for more precise shot placement and better observation of the target while it is painted with the laser.

NDFs have long since been common standard equipment on many types of Multi-Function Aiming Devices (MFALs), however they have not previously been available for Laser Aiming Modules (LAMs) such as the Steiner OTAL-C or DBAL-I² and are compatible with both Class I and Class IIIB lasers.

Version 1 is used for the IR pointer on the I2 and OTAL. It reduces the bloom to provide a sharper aiming dot.

Version 2 is most commonly used for the IR illuminator on the single spectrum I2 to create a diffused illuminator for CQB distances. This P/N is for the short barrel version. If you have a long barrel device the filter will tear and be unusable.

Version 3 is used for the IR pointer on the A2, A3, and D2. It reduces the bloom to provide a sharper aiming dot.

This Item is ITAR controlled and cannot be shipped or carried outside the United States without express written permission from the United States Department of State. We do not export outside the United States. PERIOD!