Skip to content

Norotos INVG Hyper Mount

Rated 0 out of 5
(be the first to review)
Mount Only

Break-Away Capable, Modular Night Vision Mount

 

Recommended Accessories:

Norotos Dual Dovetail Adaptor – BUY HERE

KAC/RQE JAMR – BUY HERE

 

$556.15

SKU: SKU-1868
Compare
SKU: SKU-1868 Categories: , Brand:

Description

*** NEW PRODUCTION INVG HYPER MOUNTS HAVE A SMOOTH ARM WITHOUT THE NOTCHES ***

*** IT IS RECOMMENDED TO US NOROTOS HELMET MOUNTS WITH NOROTOS SHROUDS. THERE MAY BE TOLERANCE STACKING ISSUES BETWEEN DIFFERENT MANUFACTURERS *** 

***Norotos products are built for military and law enforcement use and test-fitted at the factory, and due to the finishes used, may display wear marks or blemishes from testing, packaging, and storage, and may not have a cosmetically flawless appearance when new. These marks are not indicative of a “used” product***

The INVG Hyper Night Vision Goggle Mount is a precision-machined, highly adjustable, modular mount.  It provides an extremely stable platform for attaching almost every type of night vision goggle used by the Department of Defense and Law Enforcement communities.  The INVG Hyper retains all of the popular features from the legacy INVG mount while adding a breakaway mode for to increase operator safety and lower the chance of gear damage as well as a modular interface system.

The INVG Hyper features a single tri-lobe mount arm that pivots on its own axis.  The single arm prevents binding under pressure, tension, and field abuse and represents the strongest mount arm in the field.  The INVG Hyper can rotate on its own axis, allowing a monocular to easily pivot from eye to the other.  But, the greatest benefit is that goggles can be stowed in a lower profile than with traditional mounts.  When the user flips the goggle up into the stow position, it can then be rotated again back towards the helmet; preventing a large night vision protrusion from the helmet that can cause snag hazards and accidental damage to the goggle.  The INVG Hyper uses a force-to-overcome stow mechanism so it can be easily and quickly flipped up and down.

The INVG Hyper utilizes a field-changeable interface system that allows operators to switch between the standard bayonet horn and dovetail interface.  It comes standard with the Dovetail Interface.  Horn Interface is sold separately.  The horn interface is compatible with the AN/PVS-7B, AN/PVS-7D, AN/PVS-14.  The dovetail interface is compatible with the AN/PVS-15, AN/PVS-18, AN/PVS-31, BNVD-G, TNV/Sentinel.  Interfaces are easily swapped without tools by manipulating a spring-loaded capture pin and sliding them off the adjustment rail.  Vertical adjustment is accomplished with ease by rotating a locking lever on top of the mount before sliding the mount up and down the vertical rail.  When the desired height is found, the lever is locked down.  This is a nice improvement over the legacy system which featured a slow worm dial.  It is also easier to actuate with gloves.

The breakaway feature is what really distinguishes the Hyper Series from the legacy mounts.  A shuttle switch allows the user to set the mount to either locked or breakaway mode.  When locked, the mount will not will come loose from the shroud without pushing the release button.  In breakaway mode, the mount will release from the shroud under a user-specified amount of force.  This is extremely useful during activities where the NVG and mount can become snagged on other gear or surfaces.  Smacking a stowed NVG on a surface during activities such as fast rope and vehicle dismount can snap the user’s head back and severely injure his/her neck.  It can also cause damage to the mounted NVG.  But, if the mount has a breakaway system like the Hyper Series, it will pop loose from the shroud.  Assuming the goggle is dummy-corded to the helmet, the user will have retain it while saving his neck.  The Hyper Series Break-Away mode is user-adjustable.  A top-mounted set screw allows operators to determine how many foot/pounds pressure are required to pop the mount loose.

-Vertical, Tilt, and Fore/Aft Adjustment Levers allow for a custom fit user experience

-Helmet Mount Release Button allows one-handed release from helmet bracket or shroud

-Break-Away Button allows user to set the desired mode for mount (break-away or locked), depending on user’s operational needs.

-Glide-Rite infinitely adjustable in both vertical and horizontal directions.

-Reduced weight and an enhanced NVG center of gravity in stow position.

-Auto shut-off integral with each adapter.

Export of Norotos products is controlled by the U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR). (22 CFR Parts 120-130) regulate Wilcox products.

It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or within the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *


SPECS

Manufacturer Norotos
Material Aerospace Grade Aluminum Alloy, Hard Anodized
Vertical Adjust 1.12″ Total Travel
Finite Tilt 23º
Fore/Aft Travel 1.40″ Total Travel
Auto Shut-Off Yes
Warranty 1 Year Warranty
Compatible All Standard Bracket NVG Shrouds
Accommodates AN/PVS-7A, AN/PVS-7C, AN/PVS-7B, AN/PVS-7D, AN/PVS-14, AN/PVS-15, AN/PVS-18, AN/PVS-21, BNVD-G, TNV/Sentinel
Back To Top