TNV/RVM-14 SG SUPERGAIN (L3HARRIS UNFILMED WHITE PHOSPHOR 2376+ MIN. FOM)

***NEW – TNVC SUPERGAIN***

*** C-MOUNT VERSION AVAILABLE ***

***2376+ MIN. FOM***

***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER–CURRENT LEAD TIME ON THE TNV/RVM-14 SuperGain is 12-14 Weeks***

 

 

INTRODUCING SUPERGAIN:

Introduced commercially by TNVC in partnership with L3Harris, SuperGain is the latest image intensifier tube technology and one of the most significant evolutions in Generation 3 night vision systems and performance since the introduction of Unfilmed technology and available at TNVC as a new premium option.

Over the years, TNVC has been fully committed to making the very best and most advanced, High-Performance MIL-SPEC, duty-ready night vision, thermal, and visual augmentation systems technology available to ALL customers.

Manufactured by L3Harris and distributed by TNVC, SuperGain Unfilmed White Phosphor image intensifier tubes are already in use with the United States military, including Special Operations Forces in some of the DoD’s most elite formations. These new SuperGain image intensifiers increase the Luminance Gain (Gain) specification from the standard 40,000-80,000 fL/fc to between 100,000-120,000 fL/fc, greatly increasing the image intensifier’s ability to amplify and collect light, resulting in a noticeably brighter image with increased low light performance and extending operational envelope and ability to see into dark areas.

***ALL SYSTEMS WILL BE 2376+ MINIMUM FOM***

 

SuperGain image intensifier tubes have undergone extensive testing both by the U.S. Army’s Night Vision and Electronic Sensors Directorate (NVESD) at Fort Belvoir as well as USSOCOM and other Special Operations Forces organizations, and are currently being fielded and in-service around the world in the newest, most technologically advanced night vision systems in the force, including the AN/PSQ-42 ENVG-B Advanced Goggle as well as panoramic fusion goggles.

From the end-user’s perspective, the SuperGain tubes will be noticeably brighter than standard Unfilmed White Phosphor tubes under most conditions and will provide more useable information in extreme darkness. However, the most significant difference that users in the field will see is the ability to see deeper into dark corners and underbrush, allowing them to detect potential threats beyond the range of typical image intensifiers. This can be a significant advantage in both urban areas / inside of structures as well as in more rural areas with vegetation and heavy canopy and subterranean operations.

While many consumers, both government and commercial have been focused on FOM (Signal to Noise Ratio multiplied by Center Resolution expressed in lp/mm) as a metric for image intensifier performance and image quality, with manufacturers pushing the envelope of performance through improved methods and processes.

Luminance Gain is typically set by the manufacturer, and is the measure of how well an image intensifier can amplify light, and is one of the most critically important factors of image intensifier performance–in fact, the term “Failure,” in MTTF (“Mean Time To Failure”), commonly used to describe tube longevity and durability and expressed in terms of hours, is broadly understood to represent a roughly 50% loss of Luminance Gain.

Nevertheless, Gain has typically been set by the manufacturers at a lower setting (in accordance with MIL-SPECs) due to concerns that too much Gain could lead to increased and undesirable noise in the image, which can be true with lower performance tubes. However, with modern advances in tube manufacturing processes and consistency, L3Harris has been able to increase average tube performance by over 50% in the last six years, with modern tubes having less noise overall, allowing L3Harris to increase the tube Gain, and therefore increasing the amount of useful information provided to the user without the same levels of increased noise.

In order to maximize the benefits of the increased Gain and ensure image quality these new SuperGain systems from TNVC will ONLY be available with a minimum Figure of Merit (FOM) specification of 2376+, the highest minimum performance specification currently available to the wide market, and with actual average tube performance exceeding that of current USSOCOM specifications.

Not only do SuperGain tubes provide improved light amplification and more information to the user, but effects can be felt on the user’s end as well—the overall brighter image allows the pupil to remain smaller, even in low light conditions where image intensifier tubes begin to dim, effectively improving the user’s vision and allowing them to take full advantage of the information provided by the SuperGain tube as well as reduce eye fatigue from long term use. Meanwhile, neither image intensifier life, nor reliability are affected, with SuperGain tubes being every bit as durable and reliable as typical Unfilmed White Phosphor image intensifier tubes.

*     *     *

Experience the latest evolution of Image Intensified Night Vision devices from L3Harris, being used in the toughest conditions for the most critical missions by U.S. DoD and Tier 1 Special Operations worldwide.

Available NOW for commercial sales at TNVC.

*     *     *

 

The RVM-14 SuperGain monocular housing is billet machined from 7075 aircraft grade aluminum and designed to handle challenging real-world environments. The housing design accepts standard mil-spec PVS-14 lenses, or lightweight RPO lenses. The monocular features a side mounting area to accept PVS-14 accessories and mounts with a standard ¼-20 thread. Two monos can also be attached to a bridge mount (RVM-14 Bridge) in a binocular configuration with the small dovetail incorporated into the top of the housing, or the dovetail can be used with the RVM-14 Arm for single mono use. Both the Arm and Bridge are articulating to lay back against the helmet when in the stowed position.

 

The monocular design features a rotary switch that doubles as gain adjustment. The switch initially turns the tube on at full brightness, then dims the MX-11769 image intensifier tube as the knob is rotated further. The unit includes an onboard infrared illuminator activated by a push button switch on the front of the unit. The button is surrounded by a protective fence to prevent accidental activation. Indicators on the edge of the viewing area show if the IR LED is actively on, or if the unit detects a low battery. The weight of the unit with standard mil-spec lenses and a CR123 battery is 300 grams. The approximate battery life at room temperature is 75 hours. The RVM-14 weighs 15% less than a typical single AA PVS-14 with a 50% longer battery life and has a much tougher housing.

 

The monocular is available in Flat Black and Flat Dark Earth. The components of the monocular are media blasted to give a nonreflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the
anodizing to give a tough, attractive finish.

 

 

Export of Night Vision Equipment or related accessories (such as manuals) is strictly regulated by the US Department of State in accordance with the guidelines of the International Traffic in Arms Regulations (ITAR). It is a major crime to ship or carry US manufactured night vision devices outside the borders of the United States, punishable by fines and prison sentences. Ignorance of these regulations will not hold up in court. By purchasing night vision equipment from TNVC, you attest that you will not attempt to export or carry this night vision equipment outside the borders of the United States. Also, it illegal to allow a non-US Citizen to look through US Gen3 Night Vision Devices, even on US soil. Again, this is a crime punishable by fines and prison sentences.