True North Concepts Modular Holster Adapter (MHA)

The True North Concepts Modular Holster Adaptor (MHA) is designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adaptors by clamping the belt between an aluminum adapter and aluminum belt bars. This clamping force in conjunction with the material, 0.190″ thick domestically produced 6061-T6 Aluminum, creates a ridged, flex free platform for holsters.

The MHA supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three-hole” pattern Safariland™ type holsters, and other brands of holsters that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adaptor will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adaptor provides three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. This allows the user to custom configure their holster’s cant and height based off personal preference and body size/type. 

The Modular Holster Adaptor includes two belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on the current narrow, minimalist type battle belts used throughout SOCOM and other communities, such as those belts from GBRS Group, Ferro Concepts, Blue Force Gear, AXL, Ronin and Tyr Tactical to name just a few.  Alternatively, these mounting bars can also be directly bolted onto any standard trouser belt or gun belt up to 2 ¼” wide. When properly installed on your gun belt, the adaptor will not move.  When properly installed, all unwanted movement, slipping and sliding of the holster will be removed. The Modular Holster Adaptor also includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware, such as the MALICE clip. Each Modular Holster Adaptor comes with a complete hardware kit of various sized screws, posts, spacers and thread locker for mounting.

Note: Please confirm placement of your holster and location on your belt, and once satisfied with the configuration, USE THE INCLUDED THREADLOCKER on all screws to ensure everything stays put. Extended travel in aircraft produces vibration known to back out screws on weapons, the MHA is no different. USE THE INCLUDED THREADLOCKER, especially if you are in the profession of arms.

SPECS:

• Lightweight 6061 T6 (2 ounces heavier than the UBL)
• Non-Reflective Finish
• Milspec Type III, Class 2 Hardcoat anodized finish
• (2) color matched MOLLE/belt attachment bars
• All hardware needed to attach to Safariland “3-hole” pattern holsters.
• All hardware included to attach QLS type quick detach plates (use our hardware)
• (3) Vertical holster height adjustment points at .500” increments
• 20 degrees of holster cant adjustment 10 degree forward, 10 degree rearward
• Leg strap compatible
• Zero changes in performance in extreme cold or heat

• Adapters available for these holsters:
  • G-Code RTI wheel
  • G-Code SOC, OSL and XST Holsters.
  • Blackhawk Omnivore
  • Blackhawk T-series
  • Blackhawk EPOCH
  • Alien Gear Rapid force
  • Dara Duty Holsters
  • Any Holster that uses the standard Safariland 3-hole pattern

Available in Earth Brown, Black and Olive Drab green

The Modular Holster Adapter Leg Strap Kit attaches directly onto the True North Concepts MHA, and for the first time in the history of holsters allows the shooter to choose a custom height where the leg strap sits. By attaching the special polymer leg strap bracket onto the MHA, the leg strap will sit below the bottom edge of the MHA, flush with the bottom of the MHA, or lightly above.  Additionally, the shooter can choose the best position for their individual body size and comfort, custom tailoring their setup to their own specific needs. Each Leg Strap Kit includes the specialty bracket designed specifically for the MHA, all necessary attachment hardware, and 1″ wide Milspec nylon/elastic leg strap featuring a quick-detach Fastex buckle. The minimalistic leg strap provides a generous amount of flexibility, and it is recommended that the user try out several height adjustments to see which is most ideal before securing the hardware with thread locker. The Leg Strap Kit’s specialty bracket is designed to fit a wide array of legs straps, and is cross-compatible with wider, thicker straps such as those from Safariland, Blackhawk, Ronin Tactics, etc.

• High Strength Polymer Multi-positional attachment Bracket
• Adjustable 36″ long mil-w-5664 type 2 class 1 nylon and elastic webbing strap
• (4) Height positions to choose from when mounting to the MHA
• “Color matched” Polymer bracket, QD buckle and Triglide
• Milspec Components & Berry Compliant sewn, 100% Made in America
• 1.9 oz overall weight
• Leg Strap bracket cross-compatibility with other popular straps

Made in U.S.A.